HARVESTSMART Feed Rate Control- Initial System Calibration

NOTE: Calibration will need to be done when changing crops, harvesting crops for the first time, or when field conditions change.

Press HARVESTSMART auto button (A) until OFF appears on display.

A-HARVESTSMART Auto Button

OUO6075,000396C -19-30JUN04-1/3

Turn header engage switch (A) and separator engage switch (B) ON and lower header.

Operate machine in consistent crop at desired loss levels, maintaining the level for 10 › 15 seconds, so the machine can stabilize.

A-Header Engage Switch
B-Separator Engage Switch

OUO6075,000396C -19-30JUN04-2/3

Press calibration button (A) on VISIONTRAK display. This will set material flow and loss targets for the HARVESTSMART system.

A-Calibration Button

OUO6075,000396C -19-30JUN04-3/3