|
|
System has lost one or more of the redundancy channels or the channels are in discrepancies and is showing the following error codes: E13 200408.00, E13 200408.01, E13 200408.04, E13 200408.13, E13 200421.00, E13 200421.01, E13 200421.02, E13 200421.03, E13 200421.04, E13 200421.13, E13 200421.15, E13 200422.09.
|
To get the machine to move or move machine out of the way, use the following LIMP mode. Press diagnostic button. Press up or down arrow button until
E13
is displayed. Press enter button. Press up or down arrow button until address
103
is displayed. Press enter button. First digit will flash. Press up or down arrow button until the first digit is changed to a one. Press enter button. THIS ALLOWS THE MACHINE TO OPERATE UP TO FOUR HOURS. THIS IS NOT TO BE USED FOR NORMAL OPERATION. Call your John Deere dealer to have machine inspected immediately.
|