|
IMPORTANT:
These diagnostic trouble codes are listed for reference only. Go to the diagnostic group of the problem system for specific diagnostic information.
Each diagnostic trouble code (DTC) has a priority. The priority of the DTC is indicated in the way the DTC is displayed to the operator:
-
Priority 1 - The cornerpost display 1 will stop normal function and the DTC will be displayed. This
|
indicates a problem that requires the combine be stopped, the engine turned off immediately and the problem corrected. The cornerpost display 1 will show the DTC until the problem is resolved.
-
Priority 2 - The cornerpost display 1 diagnostic indicator comes on. This indicates a problem should be checked immediately
-
Priority 3 - DTC's will be stored, but it is not indicated to the operator.
|