HARVESTSMART Engine (RPM)-Calibration

NOTE: HARVESTSMART Feed Rate Control in SMART mode or capacity (CPCTY) mode use the same calibration procedures.

ENRPM sets the minimum engine rpm level at which the control system will allow the system to operate to. Default engine is 2170 rpm.

Press HARVESTSMART settings button until EGRPM is displayed.

H81001

OUO6075,000397A -19-30JUN04-1/3

Press enter button to access EGRPM calibration. Engine rpm will be displayed in upper right-hand corner of display.

Press up or down arrow button to increase or decrease engine rpm.

H81002

OUO6075,000397A -19-30JUN04-2/3

Press back arrow button to exit.

H81155

OUO6075,000397A -19-30JUN04-3/3