Feed Accelerator Speed
NOTE:
See Crop Settings and Configuration Recommendations in Crop Settings and Seed Loss Chart section, for proper settings.
Optional slow speed feed accelerator can be run at two different speeds, 320 rpm and 790 rpm.
Standard speed high capacity feed accelerator can be run at two different speeds, 440 rpm and 800 rpm.
Optional high speed high capacity feed accelerator can be run at two different speeds, 520 rpm and 1000 rpm.
NOTE:
When using high speed inspect feed beater wings for excessive wear. Service as needed.
The high speed is also used for better material handling in tough, small grain or weedy conditions.
|