| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
170 |
03 |
Warning |
Cab air temperature sensor output (cc# 766) is out of range - greater than 4.93 VDC. |
| CAB |
170 |
04 |
Warning |
Cab air temperature sensor output (cc# 766) is out of range - less than 0.10 VDC. |
| CAB |
171 |
03 |
Warning |
Cab inlet air temperature sensor output (cc# 763) is out of range - greater than 4.93 VDC. |
| CAB |
171 |
04 |
Warning |
Cab inlet air temperature sensor output (cc# 763) is out of range - less than 0.10 VDC. |
| CAB |
629 |
12 |
Warning |
Control unit CAB has reset itself due to watchdog timer. |
| CAB |
677 |
03 |
Warning |
Start relay signal (cc# 107) is ON when commanded OFF by control unit CAB. |
| CAB |
677 |
06 |
Warning |
Start relay signal (cc# 107) is OFF when commanded ON by control unit CAB. |
| CAB |
875 |
04 |
Warning |
HVAC low pressure switch is open. |
| CAB |
1231 |
09 |
Warning |
No Local CAN Bus messages are arriving. |
| CAB |
1487 |
03 |
Warning |
Dimmer (cc# 549) is out of range - greater than 4.5 VDC. |
| CAB |
1487 |
04 |
Warning |
Dimmer (cc# 549) is out of range - less than 0.5 VDC. |
| CAB |
1491 |
03 |
Warning |
Cab backlighting (cc# 511) is ON when commanded OFF by control unit CAB. |
| CAB |
1491 |
06 |
Warning |
Cab backlighting (cc# 511) is OFF when commanded ON by control unit CAB. |
| CAB |
1497 |
03 |
Warning |
Unloading auger indicator (cc# 533) is ON when commanded OFF by control unit CAB. |
| CAB |
1497 |
06 |
Warning |
Unloading auger indicator (cc# 533) is OFF when commanded ON by control unit CAB. |
| CAB |
1503 |
03 |
Warning |
A row of switches in the armrest switch matrix is shorted to voltage. |
| CAB |
1503 |
05 |
Warning |
Armrest matrix connection status (cc# 928) voltage too low. |
| CAB |
1503 |
11 |
Warning |
A column of switches in the armrest switch matrix is shorted to ground. |
| CAB |
1504 |
04 |
Warning |
Seat switch has remained closed for 8 continuous hours of operation. |
| CAB |
1544 |
03 |
Warning |
A row of switches in the multifunction control handle is shorted to voltage. |
| CAB |
1544 |
11 |
Warning |
A column of switches in the multifunction control handle is shorted to ground. |
| CAB |
1547 |
03 |
Warning |
Core temperature sensor output (cc# 764) is out of range - greater than 4.93 VDC. |
| CAB |
1547 |
04 |
Warning |
Core temperature sensor output (cc# 764) is out of range - less than 0.10 VDC. |
| CAB |
1549 |
00 |
Calibration |
Temperature door position (cc# 774) is out of range when fully closed - greater than 4.75 VDC. |
| CAB |
1549 |
01 |
Calibration |
Temperature door position (cc# 774) is out of range when fully open - less than 0.25 VDC. |
| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
1549 |
03 |
Warning |
Temperature door position (cc# 774) is out of range - greater than 4.5 VDC. |
| CAB |
1549 |
04 |
Warning |
Temperature door position (cc# 774) is out of range - less than 0.1 VDC. |
| CAB |
1549 |
06 |
Warning |
Temperature door actuator high (cc# 771) is OFF when commanded ON by control unit CAB. |
| CAB |
1549 |
12 |
Warning |
Temperature door has not completed the movement requested by the control unit CAB. |
| CAB |
1549 |
13 |
Information |
Temperature door has not been calibrated. |
| CAB |
1549 |
16 |
Calibration |
Temperature door position (cc# 774) is out of range when fully open - greater than 1.00 VDC. |
| CAB |
1549 |
18 |
Calibration |
Temperature door position (cc# 774) is out of range when fully closed - less than 4.00 VDC. |
| CAB |
1865 |
11 |
Warning |
One of the following conditions occurred:
Key switch run (cc# 013) is ON when key switch accessory (cc# 011) and key switch start (cc# 104) is OFF.
Key switch start (cc# 104) is ON when key switch run (cc# 013) is OFF.
Key switch start (cc# 104) is ON when key switch accessory (cc# 011) is ON. |
| CAB |
1867 |
06 |
Warning |
Cab power module micro power (cc# 012) is OFF when commanded ON by control unit CAB. |
| CAB |
2348 |
03 |
Warning |
Cab roof lights 3, 4 high (cc# 585) is ON when commanded OFF by control unit CAB. |
| CAB |
2348 |
05 |
Warning |
Cab roof lights 3, 4 high (cc# 585) is open circuit. |
| CAB |
2348 |
06 |
Warning |
Cab roof lights 3, 4 high (cc# 585) is OFF when commanded ON by control unit CAB. |
| CAB |
2368 |
03 |
Warning |
Left turn/trailer indicator (cc# 569) is ON when commanded OFF by control unit CAB. |
| CAB |
2368 |
06 |
Warning |
Left turn/trailer indicator (cc# 569) is OFF when commanded ON by control unit CAB. |
| CAB |
2370 |
03 |
Warning |
Right turn/combine indicator (cc# 597) is ON when commanded OFF by control unit CAB. |
| CAB |
2370 |
06 |
Warning |
Right turn/combine indicator (cc# 597) is OFF when commanded ON by control unit CAB. |
| CAB |
2386 |
03 |
Warning |
Front beacon light (cc# 573) is ON when commanded OFF by control unit CAB. |
| CAB |
2386 |
05 |
Warning |
Front beacon light (cc# 573) is open circuit. |
| CAB |
2386 |
06 |
Warning |
Front beacon light (cc# 573) is OFF when commanded ON by control unit CAB. |
| CAB |
2876 |
11 |
Warning |
Right turn signal (cc# 513) and left turn signal (cc# 514) are ON at the same time. |
| CAB |
3509 |
03 |
Warning |
Control unit CAB sensor supply 1 (cc# 233) is out of range - greater than 5.5 VDC. |
| CAB |
3509 |
04 |
Warning |
Control unit CAB sensor supply 1 (cc# 233) is out of range - less than 4.5 VDC. |
| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
3510 |
03 |
Warning |
Control unit CAB sensor supply 2 (cc# 243) is out of range - greater than 5.5 VDC. |
| CAB |
3510 |
04 |
Warning |
Control unit CAB sensor supply 2 (cc# 243) is out of range - less than 4.5 VDC. |
| CAB |
3597 |
06 |
Information |
CAB protected power (cc# 552) is out of range - less than 4.0 VDC. |
| CAB |
523319 |
03 |
Stop |
CAB switched power (cc# 932) is ON when commanded OFF by control unit CAB. |
| CAB |
523319 |
06 |
Warning |
CAB switched power (cc# 932) is OFF when commanded ON by control unit CAB. |
| CAB |
523490 |
03 |
Warning |
High idle indicator (cc# 529) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523490 |
06 |
Warning |
High idle indicator (cc# 529) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523491 |
03 |
Warning |
Mid idle indicator (cc# 528) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523491 |
06 |
Warning |
Mid idle indicator (cc# 528) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523492 |
03 |
Warning |
Low idle indicator (cc# 527) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523492 |
06 |
Warning |
Low idle indicator (cc# 527) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523622 |
04 |
Information |
Cab power module power 5 (cc# 062) less than 10.5 VDC at the CPM input. |
| CAB |
523623 |
03 |
Warning |
Switched auxiliary power 1 (cc# 071) is ON when commanded OFF by control unit CAB. |
| CAB |
523623 |
06 |
Warning |
Switched auxiliary power 1 (cc# 071) is OFF when commanded ON by control unit CAB. |
| CAB |
523624 |
03 |
Warning |
Cab roof lights 3 ,4 (cc# 584) is ON when commanded OFF by control unit CAB. |
| CAB |
523624 |
05 |
Warning |
Cab roof lights 3, 4 (cc# 584) is open circuit. |
| CAB |
523624 |
06 |
Warning |
Cab roof lights 3, 4 (cc# 584) is OFF when commanded ON by control unit CAB. |
| CAB |
523625 |
00 |
Calibration |
Fan speed adjust (cc# 074) is out of range at maximum - greater than 4.25 VDC. |
| CAB |
523625 |
01 |
Calibration |
Fan speed adjust (cc# 074) is out of range at minimum - less than 0.25 VDC. |
| CAB |
523625 |
03 |
Warning |
Fan speed adjust (cc# 074) is out of range - greater than 4.50 VDC. |
| CAB |
523625 |
04 |
Warning |
Fan speed adjust (cc# 074) is out of range - less than 0.50 VDC. |
| CAB |
523625 |
13 |
Information |
Fan speed adjust (cc# 074) has not been calibrated. |
| CAB |
523625 |
16 |
Calibration |
Fan speed adjust (cc# 074) is out of range at minimum - greater than 1.00 VDC. |
| CAB |
523625 |
18 |
Calibration |
Fan speed adjust (cc# 074) is out of range at maximum - less than 4.00 VDC. |
| CAB |
523626 |
14 |
Warning |
Right rear red light (cc# 517) output driver fault. |
| CAB |
523627 |
14 |
Warning |
Left rear red light (cc# 518) output driver fault. |
| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
523628 |
14 |
Warning |
Front beacon light (cc# 573) output driver fault. |
| CAB |
523629 |
03 |
Warning |
Left amber lights (cc# 516) is ON when commanded OFF by control unit CAB. |
| CAB |
523629 |
05 |
Warning |
Left amber lights (cc# 516) is open circuit. |
| CAB |
523629 |
06 |
Warning |
Left amber lights (cc# 516) is OFF when commanded ON by control unit CAB. |
| CAB |
523630 |
03 |
Warning |
Cab roof lights 1, 6 (cc# 581) is ON when commanded OFF by control unit CAB. |
| CAB |
523630 |
05 |
Warning |
Cab roof lights 1, 6 (cc# 581) is open circuit. |
| CAB |
523630 |
06 |
Warning |
Cab roof lights 1, 6 (cc# 581) is OFF when commanded ON by control unit CAB. |
| CAB |
523631 |
03 |
Warning |
Recirculation fan power (cc# 082) is ON when commanded OFF by control unit CAB. |
| CAB |
523631 |
05 |
Warning |
Recirculation fan power (cc# 082) is open circuit. |
| CAB |
523631 |
06 |
Warning |
Recirculation fan power (cc# 082) is OFF when commanded ON by control unit CAB. |
| CAB |
523632 |
03 |
Warning |
Cab roof lights 2, 5 (cc# 583) is ON when commanded OFF by control unit CAB. |
| CAB |
523632 |
05 |
Warning |
Cab roof lights 2, 5 (cc# 583) is open circuit. |
| CAB |
523632 |
06 |
Warning |
Cab roof lights 2, 5 (cc# 583) is OFF when commanded ON by control unit CAB. |
| CAB |
523633 |
03 |
Warning |
Right amber lights (cc# 515) is ON when commanded OFF by control unit CAB. |
| CAB |
523633 |
05 |
Warning |
Right amber lights (cc# 515) is open circuit. |
| CAB |
523633 |
06 |
Warning |
Right amber lights (cc# 515) is OFF when commanded ON by control unit CAB. |
| CAB |
523634 |
03 |
Warning |
Hazard lights indicator (cc# 555) is ON when commanded OFF by control unit CAB. |
| CAB |
523634 |
06 |
Warning |
Hazard lights indicator (cc# 555) is OFF when commanded ON by control unit CAB. |
| CAB |
523635 |
03 |
Warning |
Feed rate enabled indicator (cc# 541) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523635 |
06 |
Warning |
Feed rate enabled indicator (cc# 541) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523636 |
03 |
Warning |
4WD low indicator (cc# 536) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523636 |
06 |
Warning |
4WD low indicator (cc# 536) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523637 |
03 |
Warning |
4WD high indicator (cc# 543) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523637 |
06 |
Warning |
4WD high indicator (cc# 543) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523638 |
03 |
Warning |
Road/field indicator (cc# 534) has voltage present when control unit CAB has turned low side driver ON. |
| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
523638 |
06 |
Warning |
Road/field indicator (cc# 534) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523639 |
03 |
Warning |
Right rear red light (cc# 517) is ON when commanded OFF by control unit CAB. |
| CAB |
523639 |
05 |
Warning |
Right rear red light (cc# 517) is open circuit. |
| CAB |
523639 |
06 |
Warning |
Right rear red light (cc# 517) is OFF when commanded ON by control unit CAB. |
| CAB |
523640 |
03 |
Warning |
Left rear red light (cc# 518) is ON when commanded OFF by control unit CAB. |
| CAB |
523640 |
05 |
Warning |
Left rear red light (cc# 518) is open circuit. |
| CAB |
523640 |
06 |
Warning |
Left rear red light (cc# 518) is OFF when commanded ON by control unit CAB. |
| CAB |
523641 |
00 |
Calibration |
Temperature adjust (cc# 075) is out of range at maximum - greater than 4.25 VDC. |
| CAB |
523641 |
01 |
Calibration |
Temperature adjust (cc# 075) is out of range at minimum - less than 0.25 VDC. |
| CAB |
523641 |
03 |
Warning |
Temperature adjust (cc# 075) is out of range - greater than 4.50 VDC. |
| CAB |
523641 |
04 |
Warning |
Temperature adjust (cc# 075) is out of range - less than 0.50 VDC. |
| CAB |
523641 |
13 |
Information |
Temperature adjust (cc# 075) has not been calibrated. |
| CAB |
523641 |
16 |
Calibration |
Temperature adjust (cc# 075) is out of range at minimum - greater than 1.00 VDC. |
| CAB |
523641 |
18 |
Calibration |
Temperature adjust (cc# 075) is out of range at maximum - less than 4.00 VDC. |
| CAB |
523642 |
03 |
Warning |
CAN Bus message from control unit RCU that HVAC high pressure switch is open. |
| CAB |
523643 |
03 |
Warning |
Handle position 1 (cc# 935) is out of range - greater than 4.5 VDC. |
| CAB |
523643 |
04 |
Warning |
Handle position 1 (cc# 935) is out of range - less than 0.5 VDC. |
| CAB |
523644 |
11 |
Warning |
One of the following conditions occurred:
Separator engage ON switch (cc# 933) and separator engage OFF switch (cc# 931) are ON at the same time.
Separator engage ON switch (cc# 933) and separator engage OFF switch (cc# 931) are OFF at the same time. |
| CAB |
523645 |
11 |
Warning |
One of the following conditions occurred:
Header engage switch (cc# 988) is ON when both header forward switch (cc# 987) and header reverse switch (cc# 989) are OFF.
Header engage switch (cc# 988) is OFF when either header forward switch (cc# 987) or header reverse switch (cc# 989) is ON.
Header engage switch (cc# 988) is ON when both header forward switch (cc# 987) and header reverse switch (cc# 989) are ON. |
| CAB |
523646 |
03 |
Warning |
Outlet air temperature sensor output (cc# 761) is out of range - greater than 4.93 VDC. |
| CAB |
523646 |
04 |
Warning |
Outlet air temperature sensor output (cc# 761) is out of range - less than 0.10 VDC. |
| CAB |
523647 |
03 |
Warning |
Temperature door actuator high (cc# 771) and/or Temperature door actuator low (cc# 773) is ON when commanded OFF by control unit CAB. |
| Control Unit |
SPN |
FMI |
Priority |
Description |
| CAB |
523647 |
06 |
Warning |
Temperature door actuator low (cc# 773) is OFF when commanded ON by control unit CAB. |
| CAB |
523648 |
04 |
Information |
Cab power module power 4 (cc# 052) less than 10.5 VDC at input. |
| CAB |
523649 |
04 |
Information |
Cab power module power 3 (cc# 042) less than 10.5 VDC at input. |
| CAB |
523650 |
04 |
Information |
Cab power module power 2 (cc# 032) less than 10.5 VDC at input. |
| CAB |
523653 |
04 |
Information |
Cab power module power 1 (cc# 022) less than 10.5 VDC at input. |
| CAB |
523665 |
04 |
Information |
CCU/CDU/GS2/Cab Power 1 (cc# 072) at connector X555 is less than 4.0 VDC. |
| CAB |
523666 |
04 |
Information |
CCU/CDU/GS2/Cab Power 1 (cc# 072) at connector X553 is less than 4.0 VDC. |
| CAB |
523667 |
03 |
Warning |
Chassis tilt engaged indicator (cc# 535) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523667 |
06 |
Warning |
Chassis tilt engaged indicator (cc# 535) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523668 |
03 |
Warning |
Function active indicator (cc# 537) has voltage present when control unit CAB has turned low side driver ON. |
| CAB |
523668 |
06 |
Warning |
Function active indicator (cc# 537) has no voltage present when control unit CAB has turned low side driver OFF. |
| CAB |
523672 |
03 |
Warning |
Pressurizer fan motor (cc# 921) is ON when commanded OFF by control unit CAB. |
| CAB |
523672 |
05 |
Warning |
Pressurizer fan motor (cc# 921) is open circuit. |
| CAB |
523672 |
06 |
Warning |
Pressurizer fan motor (cc# 921) is OFF when commanded ON by control unit CAB. |
| CAB |
523673 |
05 |
Information |
Chassis ground (cc# 010) not connected to ground. |
| CAB |
523746 |
03 |
Warning |
System wakeup power (cc# 006) is ON when commanded OFF by control unit CAB. |
| CAB |
523746 |
04 |
Warning |
System wakeup power (cc# 006) is out of range - less than 0.10 VDC. |
| CAB |
523746 |
06 |
Warning |
System wakeup power (cc# 006) is OFF when commanded ON by control unit CAB. |