|
Moisture is too high.
|
Green plant sap or weed seed buildup on moisture sensor plates.
|
Clean moisture sensor plates.
|
|
Moisture is consistently high or low.
|
Moisture correction needs adjustment.
|
Change moisture correction.
|
|
Moisture does not change
|
Obstructed sensor. Actuator stopped.
|
Inspect moisture sensor and clean as needed.
|
|
Moisture reading is inaccurate.
|
Incorrect crop selected.
|
Select correct crop.
|
|
|
Moisture sensor out of calibration.
|
Change moisture calibration.
|
|
Moisture always zero.
|
Obstruction in sensor.
|
Inspect moisture sensor and clean as needed.
|