OMH229937: 9870 STS Combine(9870 STS 725101- ), Block File: OUO6075_0000AB3_19

Tough Crop (Rice) Discharge Beater-Wing Replacing

causym CAUTION: Shut OFF engine, set parking brake and remove key.

Discharge beater wings and wear strips can be replaced without removing the discharge beater. Replace discharge beater wings in sets of two and opposite of each other to maintain proper balance.

NOTE: If discharge beater is removed from machine, or has been serviced, tighten clamp bolts before securing wings. Tighten cap screws to specification.

Remove round head bolts (A) and replace discharge beater wear strips (B) as required. Tighten round head bolts to specification.

Specification

Discharge Beater Wear Strip Round Head Bolts -Torque

90 N·m

(66 lb-ft)

Remove cap screws (C) and replace discharge beater wings (D) as required. Tighten cap screws to specification.

Specification

Discharge Beater Wing Cap Screws -Torque

70 N·m

(52 lb-ft)

Discharge Beater Wing (Rice)

H79440

Discharge Beater Wing (Rice)

A-Round Head Bolt(s)
B-Discharge Beater Wear Strip
C-Cap Screws
D-Discharge Beater Wings

OUO6075,0000AB3 -19-16JUL07-1/1