Dimensions
|
NOTE:
Dimensions are approximate and subject to change without notice.
|
|
| Dimension |
800/65R32 Front Tires
480/70R30 Rear Tires
6.86 m (22 ft. 5 in.) Standard Unloading Auger |
800/65R32 Front Tires
480/70R30 Rear Tires
6.86 m (22 ft. 5 in.) Power Fold Auger |
| A |
11.00 m (36 ft. 1 in.) |
11.00 m (36 ft. 1 in.) |
| B |
NA |
9.12 m (29 ft. 9 in.) |
| C |
8.38 m (27 ft. 5 in.) |
8.38 m (27 ft. 5 in.) |
| D |
4.46 m (14 ft. 6 in.) |
4.46 m (14 ft. 6 in.) |
| E |
4.19 m (13 ft. 7 in.) |
4.19 m (13 ft. 7 in.) |
| F |
3.77 m (12 ft. 4 in.) |
3.77 m (12 ft. 4 in.) |
| G |
0.42 m (1 ft. 4 in.) |
0.42 m (1 ft. 4 in.) |
| H |
3.53 m (11 ft. 6 in.) |
3.53 m (11 ft. 6 in.) |
| I |
7.66 m (25 ft. 1 in.) |
7.66 m (25 ft. 1 in.) |
| J |
5.08 m (16 ft. 7 in.) |
5.08 m (16 ft. 7 in.) |
| K |
4.37 m (14 ft. 3 in.) |
4.37 m (14 ft. 3 in.) |
| La |
4.43 m (14 ft. 5 in.) |
4.43 m (14 ft. 5 in.) |
| Mb |
3.69 (12 ft. 1 in.) - 5.35 m (17 ft. 6 in.)
Front Tires |
| Nb |
3.54 (11 ft. 6 in.) - 4.50 m (14 ft. 8 in.)
Rear Tires |
- For 18.4R42 *** R1 Duals (480/80R42), add 2 mm (0.1 in.)
- For 20.8R38 ** R1 Duals (520/85R38), subtract 10 mm (0.4 in.)
- For 20.8R42 ** R1 Duals (520/85R42), add 39 mm (1.5 in.)
- For 20.8R42 ** R2 Duals, add 70 mm (2.8 in.)
|
- For 900/65R32 (172A8) R2, add 75 mm (3.0 in.)
- For 800/70R38 (173A8) R1W, add 93 mm (3.7 in.)
- For 76X50-32 16PR HF3, add 77 mm (3.0 in.)
|
| aDimension is measured 1.22 m (4 ft.) from the grain spill point. This represents the unloading auger when centered over the grain cart. |
| bDue to different tire configurations, row spacings, axle configurations, wheel offsets, axle positions and spindles types, machine widths will vary. Measurements given in chart are for minimum and maximum widths. For more detailed width information, see your John Deere dealer. |
|
|
OUO6075,0000BF8 -19-23AUG07-1/1
|
|