Feeder House Safety Stop

CAUTION: Death to you or others can occur from feeder house inadvertently lowering. Completely raise feeder house and verify that safety stop is engaged when performing any procedure with header attached to machine.

Cracking of hydraulic line fittings to lower feeder house results in an immediate dropping of feeder house and header. To prevent injury, raise feeder house completely and lower safety stop (A) onto hydraulic cylinder rod.

1. Raise feeder house completely.

2. Set parking brake, shut OFF engine and remove key.

3. Lower safety stop (A) onto hydraulic cylinder rod.

A-Safety Stop

NS43404,00005E9 -19-24APR08-1/1