USB Drive

USB Drive Requirements for John Deere Displays

• Format - Windows FAT or FAT32. This display does not recognize NTFS format.
• Capacity - There is no maximum limit to the memory capacity of the drive.
• Connectivity - USB 2.0
• Maximum Dimensions - 9.2 mm (3/8 in) thick by 21.7 mm (7/8 in) wide

Best Practices

• After inserting USB drive, wait 10 seconds. Large USB drives may take time to be recognized.
• Use a USB drive that is 4 GB or larger, so multiple backups can be stored.
• Clean all files off the USB drive that are not associated with John Deere displays.

Check Display Hardware tab in Diagnostics Center application to determine if display recognizes USB drive.