AMS Applications Overview

PC15301-UN-19MAR13

AMS Applications Package

AMS Applications package is installed at factory, but requires an activation to enable functionality. These applications are installed and updated in packages separate from the Generation 4 Operating System.

AutoTrac™ Guidance

PC16676-UN-18MAR13

AutoTrac™ Guidance

• The AutoTrac™ Guidance application is used for steering machines through the field along guidance tracks. Steering can be done manually or automatically using AutoTrac™.
• It is found on Applications tab of the display menu.

Overlap Control

PC20399-UN-16FEB15

Overlap Control

• Overlap Control automatically adjusts the header width setting as the combine moves over areas that have already been harvested.
• Overlap Control is only available on combines.
• It is found on Applications tab of the display menu.

Section Control

PC20399-UN-16FEB15

Section Control

• Section Control turns work point sections on and off automatically to reduce overlap and improve input management.
• Section Control is only available with compatible machines and implements.
• Section Control application requires a 4600 processor with a CommandCenter™ Premium activation.
• It is found on Applications tab of the display menu.

Work Totals

PC21878-UN-24NOV15

Work Totals

• Work Totals records work data, including acres worked, average product rate, and total product applied.
• Work Totals application requires a 4600 processor with a CommandCenter™ Premium activation.
• It is found on Applications tab of the display menu.