Video

PC15312-UN-15MAY13

Video

Do not rely on a camera for collision avoidance or bystander detection. To avoid possible injury or death to operator or others, always remain alert and aware of surroundings when operating the machine. Read and understand AVOID BACKOVER ACCIDENTS in the safety section.

The Video application is used to observe areas around the machine. Only one video can be viewed at a time.

4600 processor can support up to four camera inputs, while 4100 processor can support only one camera input.

For more information about the different types of displays, see Display Introduction section.

Navigate to Video

1. Select Menu.

2. Select Applications tab.

3. Select Video application.

Switching Cameras

PC23948-UN-22MAR17

Camera Icon

If more than one camera is connected, choose between video inputs by selecting different camera numbers.

Mirror Video

PC23949-UN-22MAR17

Mirror Video Button

Select Mirror Video button to simulate a rear view mirror. This swaps left and right sides of video image.

Contrast

PC23950-UN-22MAR17

Video Contrast Icon

Adjust video contrast using plus (+) and minus (-) buttons. Brighten video by selecting the plus button, and darken video by selecting minus button.

Determine if camera image or video application is mirrored before using Video application.