Tough Crop Discharge Beater Wear Strip—Replacing

H107173-UN-06MAR13

H107174-UN-06MAR13

Discharge Beater Wings and Wear Strips (Tough Crop)

A - Round Head Cap Screws

B - Discharge Beater Wear Strip

C - Cap Screws

D - Discharge Beater Wings

Discharge beater wings and wear strips can be replaced without removing the discharge beater. Replace discharge beater wings in sets of two and opposite of each other to maintain proper balance.

If discharge beater is removed from machine, or has been serviced, tighten clamp bolts before securing wings.

Always replace hardware when replacing discharge beater wear strips.

Remove round head cap screws (A) and replace discharge beater wear strips (B) as required. Tighten round head cap screws to specification.

Discharge Beater Wear Strip Round Head Cap Screws	Torque	130 N·m (96 lb.-ft.)

Remove cap screws (C) and replace discharge beater wings (D) as required. Tighten cap screws to specification.

Discharge Beater Wing Cap Screws	Torque	70 N·m (52 lb.-ft.)