Specifications (S760 and S770)

Specifications and design subject to change without notice.

Engine
Make	John Deere
Model	6090HH006 Export (9.0 L Tier 2/Stage II) 6090HH026 Export (9.0 L Tier 3/Stage IIIA) 6090HH027 Export (9.0 L Tier 3/Stage IIIA) 6090HH028 (9.0 L Final Tier 4/Stage IV)
Type	Six-cylinder, in line, valve-in-head (four valves), air-to-air aftercooled diesel turbocharged
	S760	S770
Rated Power (Tier 2/Stage II and Tier 3/Stage IIIA)	239 kW (320 hp)	278 kW (373 hp)
Rated Power (Final Tier 4/Stage IV)	249 kW (334 hp)	292 kW (392 hp)
Rated Speed	2200 rpm	2200 rpm
Power Boost at Rated Speed	25 kW (34 hp)	25 kW (34 hp)
Peak Power (Tier 2/Stage II and Tier 3/Stage IIIA)	272 kW (365 hp)	317 kW (425 hp)
Peak Power (Final Tier 4/Stage IV)	285 kW (382 hp)	335 kW (449 hp)
Peak Power Speed (Rated Speed—200 rpm)	2000 rpm	2000 rpm
Displacement	9.0 L (549 in³)	9.0 L (549 in³)
Firing Order	1-5-3-6-2-4	1-5-3-6-2-4
Air Cleaner	Dry type with safety element	Dry type with safety element

Electrical System
Battery Voltage	12 Volts
Battery Terminal Grounded	Negative
Alternator (Tier 2/Stage II) Alternator (Tier 3/Stage IIIA) Alternators (Final Tier 4/Stage IV)	200 A

Transmission
Speeds (Mechanical Shift Machines)	Three Speeds
Speeds (Push-Button Shift Machines)	Three Speeds
Speeds (ProDrive™ Machines)	Two Speed Auto Shift

Brakes
Type (Mechanical Shift Machines)	Hydraulic Shoe
Type (Push-Button Shift Machines)	Hydraulic Shoe
Type (ProDrive™ Machines)	Multiple Wet Discs

Feed Accelerator
Number of Wings	Standard: 10 Tough Crop: 8 Rice: 5

Separator Elements
Threshing Elements (TriStream™ Rotor)	Corn/Small Grain: 15
Threshing Elements (Variable Stream Rotor)	Corn/Small Grain: 15 Rice Option: 15 elements and 12 threshing tines in dense pack locations
Tines (TriStream™ Rotor)	24
Tines (Variable Stream Rotor)	20

Concave
Number of Concaves	3
Number of Bars Per Concave	Grain—Front 25, Mid/rear 25; Corn 31

Separator
Number of Grates	4

Discharge Grate
Number of Grates	3

Discharge Beater
Number of Wings	Standard: 5 Tough Crop: 8

Grain Tank
Capacity	10 572 L (300 bu) Extensions 10 572 L (300 bu) Covers
Average Unloading Rate, 116 L/s (3.3 bu/s) Unload Rate	6977 L/min (198 bu/min)
Maximum Unloading Rate, 116 L/s (3.3 bu/s) Unload Rate	7612 L/min (216 bu/min)

Weight	S760	S770
Machine Weight 1	19 504 kg (43 006 lb)	19 842 kg (43 752 lb)

Turning Radius
Rear Wheel Tread Width	3.35 m (10 ft 10 in)
Turning Radius (Non-Powered Axles)	8.02 m (26 ft 3 in)
Turning Radius (Powered Axles)	7.73 m (25 ft 4 in)

Capacities	S760	S770
Fuel Tank	950 L (250 gal)
Diesel Exhaust Fluid (DEF) Tank (Final Tier 4/Stage IV)	52.2 L (13.8 gal)
Cooling System with heater (Tier 2/Stage II and Tier 3/Stage IIIA)	53 L (56 qt)
Cooling System with heater (Final Tier 4/Stage IV)	53 L (56 qt)
Engine Crankcase with filter (Tier 2/Stage II)	27.5 L (29 qt) 2
Engine Crankcase with filter (Tier 3/Stage IIIA)	29 L (30.7 qt) 2
Engine Crankcase with filter (Final Tier 4/Stage IV)	27.5 L (29 qt) 2
Transmission (Mechanical Shift and Push-Button Shift Machines)	9.6 L (10 qt)
Final Drives	8 L (8.5 qt)
Heavy-Duty Feeder House Reverser Gear Case without cooler	2.3 L (4.75 pt)
Heavy-Duty Feeder House Reverser Gear Case with cooler	3.5 L (7.4 pt)	Not Applicable
Extra Heavy-Duty Feeder House Reverser Gear Case with cooler	4.9 L (10.4 pt)
Multi-Speed Feeder House Reverser Gear Case with cooler	Not Applicable	5.2 L (11 pt)
Premium Overshot Beater Gear Case (If Equipped)	Not Applicable	0.2 L (6.75 oz)
Primary Countershaft Drive Gear Case	1.9 L (2.04 qt)
Loading Auger Gear Case	3.8 L (4 qt)
Two-Speed Separator Drive Gear Case	4.7 L (5 qt)
Engine Gear Case with transfer (Mechanical Shift and Push-Button Shift Machines)	21.3 L (22.5 qt)
Engine Gear Case with transfer (ProDrive™ Machines)	51 L (54 qt)
Hydraulic/Hydrostatic Reservoir	31 L (33 qt)

Air Compressor (If Equipped)
Reservoir Size	60 L (16 gal)
Maximum Reservoir Pressure	827 kPa (8.27 bar) (120 psi)
Air Compressor Flow	Low Idle	250 L/min (8.8 ft³/min)
	High Idle	450 L/min (15.8 ft³/min)