Park Brake Cylinder Cables (S760 and S770 Push-Button Shift Transmission Machines)
H115764-UN-02SEP15
A - Distance
B - Actuator Housing
C - Balancer
Engage park brake (piston extended—spring applied).Measure and verify that distance (A) from the actuator housing (B) to balancer (C) on both sides is within specification.
| Park Brake Cable | Torque | 37-1/2 ± 2-1/2 mm (1-31/64 ± 3/32 in) |
Park brake cylinder cables are under extreme pressure.
Cables MUST be adjusted by your John Deere dealer.
If cables need adjusted, see your John Deere dealer.
|
OUO6075,0004440-19-20170117 |