Ballast Requirements (S760)

Ballast requirements shown for 700 Series Corn Heads and 700D Series Drapers are compatible for 600 Series Corn Heads and 600D Series Drapers.

Ballast requirements vary based on configuration.

Ballast requirements based off standard Corn Pricing configuration, 133 L (35 gal) fuel in tank, and full grain tank. This may not reflect all scenarios.

Tires requiring fluid must be filled to 75%.

	Normal (Slopes of 15% or less)				Extremely Hilly (Slopes greater than 15%)
	Two-Wheel Drive		Four-Wheel Drive		Two-Wheel Drive		Four-Wheel Drive
	Fluid Required		Fluid Required		Fluid Required		Fluid Required
Header	No	Yes	No	Yes	No	Yes	No	Yes
706C	0	0	0	0	0	0	0	0
706C-SM	0	0	0	0	0	0	0	0
708C	0	0	0	0	0	0	0	0
708C-SM	0	0	0	0	0	0	0	0
708FC	NR	1, 2, 3, 4, 5, 6	NR	1, 2, 3, 4, 5, 6	NR	NR	NR	NR
712C	0	0	0	0	NR	2, 3, 4, 5, 6	NR	1, 2, 3, 4, 5, 6
12R45-65	0	0	0	0	NR	1, 2, 3, 4, 5, 6	0	0
615 BPU	0	0	0	0	0	0	0	0
618R & F	0	0	0	0	0	0	0	0
620R & F	0	0	0	0	0	0	0	0
622R & F	0	0	0	0	0	0	0	0
625R & F	0	0	0	0	0	0	0	0
630R & F	0	0	0	0	4, 5, 6	1, 2, 3	0	0
635F	0	0	0	0	NR	4, 5, 6	NR	1, 2, 3, 4, 5, 6
725D	0	0	0	0	NR	4, 5, 6	NR	1, 2, 3, 4, 5, 6
730D	0	0	0	0	NR	NR	NR	NR
735D	4, 6	1, 2, 3, 5	0	0	NR	NR	NR	NR
630FD	0	0	0	0	NR	NR	NR	2, 4, 5, 6
635FD	0	0	0	0	NR	NR	NR	NR
BPU = Belt Pickup Platform R = Rigid Platform F = Flex Platform D = Draper Platform FD = Flex Draper Platform C = Corn Head C-SM = Corn Head with StalkMaster™				0 = No ballast required for any rear tire option. 1 = 600/70R28 rear tires. 2 = 23.1R26 rear tires. 3 = 620/75R26 (or 620/70R26) rear tires. 4 = 750/65R26 rear tires. 5 = 710/65R26 rear tires. 6 = 710/60R30 rear tires. NR = Not recommended since machine with header cannot be properly ballasted.