Engine Speed Management (ProDrive™ Machines)

Engine speed management is software-controlled and activated with the road transport disconnect switch.

Engine speed management reduces fuel consumption and increases fuel efficiency.

• Fuel consumption is reduced in low load conditions with a reduction in engine speed.
• Maintain high load capabilities by dynamically increasing engine speed when needed.
• Ground speed is maintained during engine speed changes through varying hydrostatic displacements.
• Engine speed stays at low idle when machine is not moving.
• Engine speed is approximately 1600 rpm when machine is on flat ground or with low ground speeds.
• Engine speed changes between approximately 1600 rpm and maximum high idle depending on the engine load.

• Low Engine Speed - engine speed stays at 1200 rpm.
• Medium Engine Speed - engine speed will not exceed 1690 rpm.
• High Engine Speed - engine speed changes between approximately 1600 rpm and maximum high idle.