Header Details

Header Details includes settings such as width, minimum reel speed, and row width.

Each header type has factory default settings for all header settings. Connecting a header of a given type for the first time automatically loads the factory default settings. You can change header settings while the header is connected. Connecting any header of the same type automatically uses settings for that header type, but will not automatically change the settings or hours.

H113523
H113523-UN-19DEC16

Width

Items Accessible on the Header Details Page:

Some items below are only displayed if machine is equipped with the associated option.

Width— set the cut width.

H113525
H113525-UN-19DEC16

Width

Width— set the number of rows.

H113526
H113526-UN-19DEC16

Row Width

Row Width— spacing between rows.

H113521
H113521-UN-19DEC16

Work Recording

Work Recording— set the recording stop height.

H113522
H113522-UN-19DEC16

Hours

Hours— number of hours per header type recorded by the combine.

H113527
H113527-UN-19DEC16

Reel Installed

Reel— select to indicate to system that header has a reel installed.

EX: If you have a corn head that normally does not have a reel installed, you would select this to tell the machine that a reel is installed.

H113524
H113524-UN-19DEC16

Minimum Reel Speed

Minimum Reel Speed— set the minimum reel speed.

SS43267,00007DF-19-20170516