Header Automation
Enable or disable header automation functions.
Some items below are only displayed if machine is equipped with the associated option.
H116995-UN-19DEC16
Defaults
Defaults— select to use defaults of header type connected.
H116995-UN-19DEC16
Custom
Custom— select to choose which automated systems you want to enable based on your personal operating preferences.ON/OFF toggles are unable to be switched until the "Custom" option is selected.
H116168-UN-19DEC16
Alert
When a given automation option has issues preventing it from being enabled, the toggle switch is replaced with a generic issue alert icon button.
H116161-UN-19DEC16
Height Resume
Height Resume— select position of the feeder house relative to machine chassis and return to that position automatically.
H116160-UN-19DEC16
Feeder House Float
Feeder House Float— allows a rigid header to be operated in contact with the ground and maintain a set pressure.
H113720-UN-19DEC16
Height Sensing
Height Sensing (Off Ground)— select the position of the header relative to the ground and return to that position automatically.
H113720-UN-19DEC16
Height Sensing
Height Sensing (On Ground)— adjust cutterbar ground pressure and return to that setting automatically.
H113721-UN-19DEC16
Lateral Tilt
Lateral Tilt— maintain the header position relative to ground.|
SS43267,00007ED-19-20170127 |