Height Resume

Height Resume allows you to select position of the feeder house relative to the machine and return to that position automatically.

Modify When:

• Changing crop height throughout the same field.
• Changing the header type.
• Ground terrain changes.
• Changing from cutting on-ground to cutting off-ground.

System Is Enabled When:

• Properly equipped header is connected to the machine.
• Engine is running.
• Road transport disconnect switch is in field position.
• Height Resume system is ON.
• Header is engaged.

H116962-UN-19DEC16

Auto Control

1. Select Auto Control on Header application main screen.

2. 
   H116165-UN-19DEC16

   ON/OFF

   Select to turn Height Resume ON/OFF.

   
   H116168-UN-19DEC16

   Alert Icon

   If the automation option has issues preventing it from being enabled, the ON/OFF toggle is replaced with an alert icon. Selecting this button brings up information to aid in troubleshooting the issues.

   NOTE: Depending on machine configurations and the setup of your configurable switches and buttons on the multi-function lever, many combinations exist.

---




3. 
   H116346-UN-19DEC16

   Activation Buttons

   Press the desired activation button.

   Height Resume will return to last known adjustment setting.

   
   H116353-UN-19DEC16

   Height Resume

   Height Resume icon appears on the corner post display.

   
   H116354-UN-19DEC16

   Activation Number

   Activation number on the corner post display indicates which button was selected.

---




4. 
   H116347-UN-20DEC16

   Adjustment Dial

   Adjust height using header adjustment dial.
   • Turn header adjustment dial clockwise to raise the header and setpoint.
   • Turn header adjustment dial counterclockwise to lower the header and setpoint.
   
   

   
   H116356-UN-20DEC16

   Bar Graph

   Bar graph on the corner post display shows the header's relative position based on header height sensor linked to the header.

   
   H118305-UN-19DEC16

   Numeric Display

   Numeric display on the corner post display shows the header's relative position based on header height sensor linked to the header.

   
   H116348-UN-19DEC16

   Raise/Lower

   Using the header raise/lower switch temporarily deactivates system.

   Pressing and holding the header raise/lower switch for 5 s disables the system.

   Press activation buttons 1, 2, or 3 to reactivate system. Header automatically moves to last known setting.

---




5. 
   H116648-UN-19DEC16

   Close

   Select to close.

---