Lateral Tilt

Lateral Tilt allows you to maintain header position relative to the ground using the lateral tilt system to equalize the distance to the ground at each end of the header.

Modify When:

  • ON: For headers equipped with the appropriate sensors use lateral tilt to maintain a uniform cut height across the width of the head while cutting on or off the ground.
  • OFF: You may disable lateral tilt if it is preferred to tilt the head manually by pressing the lateral tilt button on the multi-function lever, or if the header is not equipped with the appropriate sensors.

System Is Enabled When:

  • Properly equipped header is connected to machine.
  • Engine is running.
  • Road transport disconnect switch is in field position.
  • Header was calibrated.
  • Lateral Tilt system is ON.
  • Header is engaged.

H116962
H116962-UN-19DEC16

Auto Control

Procedure to Modify:

  1. Select Auto Control on Header application main screen.

  2. H116165
    H116165-UN-19DEC16

    Lateral Tilt

    Select to turn Lateral Tilt ON/OFF.

    H116168
    H116168-UN-19DEC16

    Alert Icon

    When a given automation option has issues preventing it from being enabled, the toggle switch is replaced with a generic issue alert button. Selecting this button brings up a message dialogue with information to aid in troubleshooting the issues.

    Depending on machine configurations and the setup of your configurable switches and buttons on the multi-function lever, many combinations exist.


  3. H116346
    H116346-UN-19DEC16

    Activation Buttons

    Press the desired activation button.

    H116359
    H116359-UN-19DEC16

    Lateral Tilt

    Lateral Tilt icon appears on the corner post display.

    Lateral Tilt will return to last known adjustment setting.

    H116354
    H116354-UN-19DEC16

    Activation Number

    Activation number on the corner post display indicates which button was selected.

    H116348
    H116348-UN-19DEC16

    Raise/Lower

    Pressing Lateral Tilt switch overrides system. When the switch is released within 5 s, system returns to automatic mode.

    Press right side of switch to tilt the header to the right or press left side of switch to tilt the header to the left.

    Press activation buttons 1, 2, or 3 to reactivate system. Header automatically returns to last known setting.


  4. H116648
    H116648-UN-19DEC16

    Close

    Select to close.

SS43267,00007F2-19-20170621