Quick Stop Switch

H117033-UN-15APR16

Quick Stop Switch

ProDrive™ Machines: Pressing the quick stop switch with the separator engaged causes the machine to slowly roll to a stop. Multi-function lever must be returned to neutral position to reset the propulsion system.

Push-Button Shift Transmission or Mechanical Shift Machines: When pressing the quick stop switch with separator engaged, you are responsible for pulling back on the multi-function lever to stop the machine.

It is always recommended to wear your seat belt to avoid serious injury.

Header drive can be disengaged by this switch in case of plugging.

Pushing unloading auger drive switch on the multi-function lever restarts the unloading auger drive. To engage header drive, turn the header engage switch OFF and back ON.

The following systems stop when Quick Stop Switch is pressed:

• Header Engage
• Unloading Auger Drive
• Unloading Auger Swing
• Grain Tank Covers (If Equipped)
• Power Folding Auger (If Equipped)
• ProDrive™ (propulsion movement slowly stops) (If Equipped)