Unloading Auger Drive Switch

H117004-UN-28MAR16

Unloading Auger Drive Engage/Disengage Switch and Indicator Light

System Requirements:

• Road transport disconnect switch must be in field position.
• You must be seated.

Press the unloading auger drive switch once to turn ON or press the unloading auger drive switch again to turn OFF. Indicator light comes ON when system is engaged.

Unloading auger drive can also be turned OFF with the quick stop switch in case of an emergency. To engage unloading auger if the header and unloading auger are stopped with the quick stop switch, press unloading auger switch again.

Unloading auger drive engages only when the button is held while the auger is in auto swing mode or when the auger is manually swung out greater than 50%.

If you leave the seat after engagement, the unloading auger drive will continue to operate for five seconds before disengaging. To engage the system, sit on the operator’s seat and press the unloading auger switch again.

• Press the switch once to turn ON. Indicator light comes ON when the system is engaged.
• Press the switch again to turn OFF.