Header Raise Lower and Tilt (If Equipped) Switch

H116348-UN-19DEC16

Header Raise/Lower Switch

System Requirements:

• Road transport disconnect switch must be in field position.
• You must be seated.

Press and hold the top of the switch to raise header.

Press and hold the bottom of the switch to lower header.

Header raise/lower switch has two detent positions. Pushing part way in on the switch causes the header to raise or lower slowly. Header raises or lowers at a faster rate when the switch is pressed in all the way.

Press and hold left-hand side or right-hand side of switch to tilt feeder house.