Mass Flow Vibration

This procedure calibrates the mass flow sensor to accommodate for normal vibration of machinery while in operation. Performing this calibration prevents the mass flow sensor from falsely reading vibration as material being harvested.

Mass Flow Vibration calibration must be performed when changing headers and in every crop that is harvested.

Perform Calibration When:

• Control unit AYM or associated components are replaced/adjusted.
• Equipment configuration such as a Header has changed.
• Crop type being harvested has changed.
• Mass Flow Sensor has been replaced.

Items Accessible on Mass Flow Vibration Calibration Page:

N120226-UN-23FEB16

Begin Calibration

Requirements—machine state required for calibration.

Details Displayed on Page:

Last Calibration	Date and Time
Recommended Interval	See “Perform Calibration When” section for more information.
Estimated Time Required	Approximately 1 min