Chassis Tilt

This procedure calibrates the Chassis Tilt to ensure best machine pitch sensor accuracy. A properly calibrated Chassis Tilt provides the best results for the harvest setting recommendations provided in the Operator's Manual.

Perform Calibration When:

• Each header type is connected to the combine for the first time.
• Fore/Aft Pitch sensor has been replaced.

Items Accessible on Chassis Tilt Page:

N120226-UN-23FEB16

Begin Calibration

Requirements—machine state required for calibration.

Details Displayed on Page:

Last Calibration	Date and Time
Estimated Time Required	Approximately 1-2 min