Unloading Auger Engage

This procedure calibrates Unloading Auger Engage by measuring the time it takes to engage the auger when commanded, and then adjusts to make a softer auger engagement.

Perform Calibration When:

• Unloading auger belt, hydraulic, drive, electrical or associated components are replaced/adjusted.
• Unloading auger engagement is more difficult than expected.

Items Accessible on Unloading Auger Engage Page:

N120226-UN-23FEB16

Begin Calibration

Requirements—machine state required for calibration.

Details Displayed on Page:

Last Calibration	Date and Time
Recommended Interval	As Needed
Estimated Time Required	Approximately 1-2 min