Yield | Collected Sample Status
Collected Sample Status indicates the criteria met, by the current sample set. When a criterion is met a checkmark is displayed next to it.
H119368-UN-18JAN17
High Quality
High Quality—all samples are taken from a uniform area of the field that provides a constant flow of grain.
H119369-UN-18JAN17
High Flow
High Flow—determined using the gauge on the record sample page. Grain flow must be above 66% of the maximum flow for combine model and crop. Increase ground speed to increase flow.
H119370-UN-18JAN17
Medium Flow
Medium Flow—determined using the gauge on the record sample page. Grain flow must be between 33%-66% of the maximum flow for combine model and crop. Adjust ground speed to regulate flow.
H119371-UN-18JAN17
Low Flow
Low Flow—determined using the gauge on the record sample page. Grain flow must be below 33% of the maximum flow for combine model and crop. Decrease ground speed to decrease flow.For the best calibration collect at least 4 loads in all flow ranges:
- High
- Medium
- Low
In tough harvesting conditions, when higher flow rates are not achievable, use following process:
Collect the first load using the highest harvesting speed as 100%, then collect 3 more loads lowering harvesting speed to 83%, 67%, and 50%.
Repeat the process, if more loads are to be collected.
|
SS43267,0000875-19-20170117 |