Out of Cab Adjustments

Adjustments must be made outside the cab to improve residue management and prevent damage of the machine. See Operator's Manual for further crop settings and adjustment procedures.

Out of Cab Adjustments Page:

Crop Diverter/Deflector— select corn or grain position.

Place in corn position to prevent cleaning shoe damage while harvesting corn.

Crop Diverter Vanes— adjust vanes to control distribution of material into chopper or spreaders.

Knifebank— select a knifebank position to achieve desired residue length.

Knifebank must be fully disengaged for corn.

The more engagement, the more power is consumed by the chopper.

Chopper Drive Speed— select high speed for small grains and soybeans and low speed for corn.