Active Terrain Adjustment™ (ATA) Status

H115029
H115029-UN-05JAN17

Status

Active Terrain Adjustment™ (ATA) Status shows the requirements for ATA automation.

Select screen area under Status to open ATA Status page.

H114659
H114659-UN-05JAN17

Blue

Items Displayed on Active Terrain Adjustment™ Status Page:

Applying Offsets— accommodating for terrain.

H114656
H114656-UN-05JAN17

Green

Monitoring

H114658
H114658-UN-05JAN17

Amber

Not Ready— pitch sensor requires calibration.

H114658
H114658-UN-05JAN17

Amber

Not Ready— header must be below record stop height.

H114658
H114658-UN-05JAN17

Amber

Not Ready— machine must be ready to harvest.

H114658
H114658-UN-05JAN17

Amber

Not Ready— engine must be set to high idle.

H114657
H114657-UN-05JAN17

Red

Error Detected— attention required.

H114657
H114657-UN-05JAN17

Red

Error Detected— fan system fault present.

H114655
H114655-UN-05JAN17

Gray

Automation OFF

Active Terrain Adjustment™ Requirements:

  • ATA automation must be ON.
  • Machine must be ready to harvest:

    — Separator must be engaged.

    — Header must be engaged.

    — Engine must be set to high idle.

    — Road Mode must not be enabled.

  • Header must be below record stop height.

H114663
H114663-UN-05JAN17

Message

A message appears when a requirement is not met.

H118541
H118541-UN-30JAN17

Select to Advance

Requirement not met, select to calibrate the pitch sensor.

H114662
H114662-UN-05JAN17

Checkmark

Once a condition has been met a green checkmark appears.

H114674
H114674-UN-03JAN17

Close

Select to close.

Active Terrain Adjustment is a trademark of Deere & Company

SS43267,00008AA-19-20170518