Moisture Correction

Moisture Correction allows you to toggle between Moisture Correction or Fixed Moisture, adjust the value when moisture percentage measured by combine moisture sensor differs from the elevator certified moisture, and disable moisture sensor reading and force a preset moisture value.

Modify To:

• Toggle between moisture correction and fixed moisture.
• Change amount of correction needed to match a certified moisture reading.
• Change fixed moisture level used when the fixed moisture feature is enabled.

H114785-UN-10JAN17

Checked

Set moisture correction to difference between combine moisture sensor and elevator certified moisture sensor. {Example: elevator moisture (13%) minus combine measured moisture (12%) = moisture difference (+1%)}

1. If Use Fixed Moisture is checked, deselect checkbox to enable Correction.

2. 
   H119132-UN-10JAN17

   Value

   Select to open number pad and enter desired value.

---




3. 
   H114789-UN-10JAN17

   OK

   Select OK to save value.

---

Moisture correction can be a positive or negative number.

H114786-UN-10JAN17

Unchecked

1. If Use Fixed Moisture is not checked, select checkbox to enable.

2. 
   H119133-UN-10JAN17

   Value

   Select to open number pad and enter desired value.

---




3. 
   H114789-UN-10JAN17

   OK

   Select OK to save value.

---