CommandARM™

CommandARM™ Controls Setup is used to assign Application and Functions to the CommandARM™.

Procedure to Modify:

H118139
H118139-UN-20JAN17

CommandARM™

Select the CommandARM™ assignments tab.

H114656
H114656-UN-05JAN17

Active State

H118140
H118140-UN-20JAN17

Lock Indicator

When you select the Control Group Lock button, all previously assigned custom controls are illuminated "Green" to indicate their active state, and the on-screen Lock Indicator is hidden.

If there are no custom assignments present, the application does not open upon unlocking the control group.

H118159
H118159-UN-20JAN17

Programmable Button 1

H118161
H118161-UN-20JAN17

Programmable Button 2

Buttons 1 and 2— are used for applications that require you to select from multiple positions, to increase or decrease a value, or to make a left-hand or right-hand adjustment.

H118160
H118160-UN-20JAN17

Programmable Button 3

H118162
H118162-UN-20JAN17

Programmable Button 4

Buttons 3 and 4— are used for applications that require you to select from single position assignments.

The on-screen Lock Indicator is present whenever the displayed Control Group is locked with the Control Group Lock button on the CommandARM™. Control Group locks re-engage on key cycle.

H118140
H118140-UN-20JAN17

Lock Indicator

Lock Indicator— illuminates to indicate that the Control Group Lock button is locked.

H116648
H116648-UN-19DEC16

Close

Select to close the Controls Setup application.

CommandARM is a trademark of Deere & Company

SS43267,0000912-19-20170516