Create Single Position Assignments

Buttons A and B or 3 and 4 allow you to assign and activate your preferred Applications, then make Function assignments.

For additional Application and Function information, select the Help Contents button.

Procedure to Modify:

Use Controls Setup reconfigurable buttons to personalize your machine and perform tasks quickly with the press of a button.

The Example shown is typical for making Application assignments. Select to view a list of available Application or Function assignments.

Example: This example will assign the AutoTrac™ Guidance application to button A.

1. 
   H118507-UN-20JAN17

   Select Application

   Select to activate the Select Application display.

   
   H118506-UN-20JAN17

   Remove Assignment

   If an assignment is already present on the Control Setup display, the "Remove Assignment" option is placed at the top of the list. Select to close and clear the assignment.

---




2. 
   H118156-UN-20JAN17

   AutoTrac™ Guidance

   
   H118509-UN-20JAN17

   AutoTrac™ Guidance Selected

   Select the AutoTrac™ Guidance application.

---




3. 
   H118157-UN-20JAN17

   Center Track

   
   H118510-UN-20JAN17

   Center Track Selected

   Select Center Track function.

   After selecting the function, the control assignment is made.

---




4. 
   H116648-UN-19DEC16

   Close

   Select to close the Controls Setup application.

---