Select areas to improve.

"Select areas to improve." allows you to select an area needing improvement.

H116652
H116652-UN-30JAN17

Grain Losses

Items Accessible on "Select areas to improve." Page:

Grain Losses— select if Grain Losses is an area you would like to improve.

H116653
H116653-UN-30JAN17

Grain Quality

Grain Quality— select if Grain Quality is an area you would like to improve.

H116573
H116573-UN-25JAN17

Straw Quality

Straw Quality— select if Straw Quality is an area you would like to improve.

H116574
H116574-UN-25JAN17

Excess Tailings

H119179
H119179-UN-25JAN17

Excess Tailings Disabled

Excess Tailings— select if you have excess tailings.

H116316
H116316-UN-25JAN17

Error Message

Excess Tailings can only be selected in combination with another issue. If not, an error message appears.

H116294
H116294-UN-30JAN17

Next

The “Next” button will remain disabled until at least one item has been selected.

H116293
H116293-UN-30JAN17

Next

If multiple selections are made, selecting "Next" advances to next area to improve.

When all areas to improve have been addressed, selecting "Next" will take you ICA is finding recommendations.

If you are reporting new issues in the middle of an ICA session, current unresolved issues will remain checked.

H116292
H116292-UN-30JAN17

Stop Session

Select to stop session.

Stop Session is the best method to close the application without resolving all issues and starting over if you re-open the application. Adjustments that were made by ICA will not be undone if Stop Session is chosen to close the system.

Stop session is only available if you are reporting new issues in the middle of an ICA session.

H116310
H116310-UN-30JAN17

Close

Select to close ICA application.

ICA will resume in the same place when you re-enter after closing.

SS43267,0000926-19-20170516