Offset Tuning | Cleaning Fan

Offset Tuning | Cleaning Fan adjusts the Step Size amount to the fan speed when commanded by the Active Terrain Adjustment™ (ATA) system.

The word "Managed" always appears on the Integrated Combine Adjustment 2 Main Screen in the Cleaning Fan area.

Modify When:

Adjust the step sizes if sensitivity adjustments are ineffective.

Increasing Step Size:

When maximum sensitivity setting is not achieving desired results, or when all but one component needs more adjustment than the others.

Decreasing Step Size:

When minimum sensitivity setting is not achieving desired results, or when all but one component needs less adjustment than the others.

Step sizes are individual increments, not the total range of the adjustments or number of adjustments.

Procedure to Modify:

1. 
   H119128-UN-05JAN17

   Step Size

   Select to open Step Size page.

---




2. 
   H118542-UN-05JAN17

   Step Size

   Select desired value.

   
   H114644-UN-05JAN17

   Fan Speed

   Minimum: 20 rpm

   Default: Based on crop being harvested.

   Maximum: 50 rpm

   Increment: 10 rpm

---




3. 
   H114674-UN-03JAN17

   Close

   Select to close.

---