Offset Tuning | Chaffer

Offset Tuning | Chaffer adjusts the Step Size amount to the fan speed when commanded by the Active Terrain Adjustment™ (ATA) system.

Modify When:

NOTE: Adjust the step sizes if sensitivity adjustments are ineffective.

Increasing Step Size:

When maximum sensitivity setting is not achieving desired results, or when all but one component needs more adjustment than the others.

Decreasing Step Size:

When minimum sensitivity setting is not achieving desired results, or when all but one component needs less adjustment than the others.

NOTE: Step sizes are individual increments, not the total range of the adjustments or number of adjustments.

Procedure to Modify:

1. 
   H119751-UN-30JAN17

   Step Size

   Select Step Size to open number pad and enter desired value.

   
   H114645-UN-05JAN17

   Chaffer

   Minimum: 1 mm

   Default: Based on crop being harvested.

   Maximum: 3 mm

   Increment: 1 mm

---




2. 
   H119859-UN-30JAN17

   Include in Automation

   Uncheck to prevent ATA from adjusting the chaffer.

   Include in automation" defaults to checked.

   If "Include in automation" is checked the word "Managed" appears on the main screen.  If not checked then the word "Ignored" appears on-screen.

---




3. 
   H114674-UN-03JAN17

   Close

   Select to close.

---