Target Pressure

Target Pressure allows the machine to maintain a consistent load on the separator.

Modify When:

You want to make adjustments to the target based on VisionTrak™ results.

• If VisionTrak™ indicates that total grain loss is below the green area on the corner post display, increase target pressure.
• If VisionTrak™ indicates that total grain loss is above the green area on the corner post display, decrease target pressure.

H118563-UN-20JAN17

Target Pressure

1. Select plus (+) to increase or minus (-) to decrease desired pressure.

   NOTE: When you adjust Target Pressure, the setting starts at current pressure and can be adjusted up or down from there.

   Minimum— 0%

   Maximum— 100%

   Increments— 0.5%

2. 
   H118559-UN-20JAN17

   Close

   Select to close.

---

H118564-UN-20JAN17

Target Pressure

1. Select to activate Armrest Adjustment Dial.

2. 
   H115034-UN-28MAR16

   Armrest Adjustment Dial

   Use Armrest Adjustment Dial to select desired setting.
   • Turn dial clockwise to increase value.
   • Turn dial counterclockwise to decrease value.
   
   

   Minimum— 0%

   Maximum— 100%

   Increments— 0.5%

---