Active Terrain Adjustment™ Status

Active Terrain Adjustment™ (ATA) Status is used to communicate the current state of the ATA system. Status also allows you to view requirements that must be met for the system to operate properly.

H119192
H119192-UN-30JAN17

Active Terrain Adjustment™

Select screen area under Active Terrain Adjustment™ (ATA) to open status page.

Items Displayed on Active Terrain Adjustment™ Status Page:

Not all faults are listed below. Select screen area to open list of current statuses.

H114659
H114659-UN-05JAN17

Blue

Applying Offsets— accommodating for terrain.

H114656
H114656-UN-05JAN17

Green

Monitoring

H114658
H114658-UN-05JAN17

Amber

Not Ready— pitch sensor requires calibration.

H114658
H114658-UN-05JAN17

Amber

Not Ready— header must be below record stop height.

H114658
H114658-UN-05JAN17

Amber

Not Ready— machine must be ready to harvest.

H114658
H114658-UN-05JAN17

Amber

Not Ready— engine must be set to high idle.

H114657
H114657-UN-05JAN17

Red

Error Detected— attention required.

H114657
H114657-UN-05JAN17

Red

Error Detected— fan system fault present.

H114655
H114655-UN-05JAN17

Gray

Automation OFF

Active Terrain Adjustment™ Requirements:

  • ATA automation must be ON.
  • Machine must be ready to harvest:
    • Separator must be engaged.
    • Header must be engaged.
    • Engine must be set to high idle.
    • Road Mode must not be enabled.
  • Header must be below record stop height.

H113789
H113789-UN-30JAN17

Exclamation Mark

A message appears when a requirement is not met.

H118541
H118541-UN-30JAN17

Header Details

Requirement not met for "Header must be below record stop height", select to access Header Details page.

H119194
H119194-UN-30JAN17

Green Check

Once a condition has been met, a green check appears.

H116936
H116936-UN-30JAN17

Close

Select to close.

Active Terrain Adjustment is a trademark of Deere & Company

SS43267,0000961-19-20170517