Advanced Settings | Separator Resolution

Separator Resolution allows you to modify the number of bars on the Corner Post Display VisionTrak™ for the separator loss indicator.

Prior to Modification:

1. Harvest with the machine at current settings.

2. Perform a Power Shutdown (see Operator's Manual for procedure).

3. Inspect for any grain loss from the separator.

If loss is present, determine if the loss is acceptable to the amount of bars indicated by the VisionTrak™ display.

Modify When:

Modify when the VisionTrak™ display does not indicate the amount of grain loss from the separator that is preferred.

• Increase Separator Resolution to show more emphasis on grain loss from the threshing & separating section.
• Decrease Separator Resolution to show less emphasis on grain loss from the threshing & separating section.

N118004-UN-22OCT15

Advanced Settings

1. Select the Advanced Settings button.

   
   H118553-UN-27JAN17

   Slide Bar

   Slide bar displays the current resolution.

---




2. 
   H116272-UN-27JAN17

   Separator Resolution

   Select plus (+) to increase or minus (-) to decrease the separator resolution.

   Minimum: -5

   Maximum: 5

   Default: 0

   Increment: 1

---




3. 
   H116113-UN-27JAN17

   Close

   Select to close.

---