Settings
Settings allow you to select desired operating modes to monitor loss levels and to maintain a constant material flow.
H114683-UN-20JAN17
Smart
Items Accessible Under Settings:Operating Mode Items:
Use Smart Mode When:
You want the machine to reduce grain loss and automatically adjust target pressure and ground speed based on VisionTrak™ results.
Use Capacity Mode When:
You want to manually adjust the target pressure to maximize throughput and control ground speed regardless of the VisionTrak™ results.
Smart Mode— automatically adjusts separator pressure target to stay within your defined loss level.
H118575-UN-20JAN17
Capacity
Capacity Mode— automatically adjusts ground speed to maintain a constant load on the threshing system.
H118561-UN-20JAN17
Set Target
Smart Target Items:Set Target— allows you to set VisionTrak™ and HarvestSmart™ targets at the same time.
H118562-UN-20JAN17
Grain Loss
Grain Loss— allows you to open the Harvest Settings application to adjust threshing performance for minimum harvest loss (only available in Smart Mode).
H118561-UN-20JAN17
Set Target
Target Pressure Items:Set Target— allows you to automatically adjust target volume without changing the Grain Loss monitor settings.
H118563-UN-20JAN17
Target Pressure
Target Pressure Manual Adjustment— allows you to manually adjust target volume without changing the Grain Loss monitor settings (only available in Capacity Mode).Limiter Items:
Limiters— allow you to set ground speed or engine power limits within the HarvestSmart™ system.
Aggressiveness Items:
Aggressiveness— allows you to adjust how quickly the system responds to changes in VisionTrak™ loss or threshing system load.
|
VisionTrak is a trademark of Deere & Company HarvestSmart is a trademark of Deere & Company |
SS43267,000098A-19-20170516 |