Status

H120559-UN-20JAN17
Status is used to communicate the current state of the HarvestSmart system.
Status also allows you to view requirements that must be met for the
system to operate properly.
Select screen area under Status to open HarvestSmart™ Status.

H114655-UN-05JAN17
Gray
Status Indicators:
Automation OFF

H114658-UN-05JAN17
Amber
Not Ready— machine must be ready to harvest.
"Not Ready" state has many conditions that can be shown.
Clicking on the status lists everything that inhibits HarvestSmart™
from operating.

H114656-UN-05JAN17
Green
Ready— press the 3 or 2 button on the multi-function lever
to resume HarvestSmart™.

H114656-UN-05JAN17
Green
Preparing Target— must be in consistent harvesting conditions.

H114656-UN-05JAN17
Green
Acquiring New Performance Target— maintain consistent harvest
conditions.

H114659-UN-05JAN17
Blue
Active— automating ground speed.

H114656-UN-05JAN17
Green
Maintaining Ground Speed— move multi-function lever to regain
control.

H114658-UN-05JAN17
Amber
State | Max Speed Limited— maximum ground speed limit reached.
This state overrides the Preparing, Acquiring, Active,
and Maintaining states. These reduced state names appear where "State"
is listed when max speed is limited.

H114658-UN-05JAN17
Amber
State | Engine Power Limited— maximum engine power limit
reached.
This state overrides the Preparing, Acquiring, Active,
and Maintaining states. These reduced state names appear where "State"
is listed when engine power is limited.

H114658-UN-05JAN17
Amber
Active | Reduced Functionality— separator sensor error present.

H114658-UN-05JAN17
Amber
Active | Reduced Functionality— (right/left) shoe loss sensor
error present.

H114657-UN-05JAN17
Red
Error Detected— separator drive pressure sensor error present.

H114655-UN-05JAN17
Gray
Automation OFF | Error Detected— separator drive pressure
sensor error present.
HarvestSmart™ Requirements:
-
HarvestSmart™ automation must be ON.
-
Performance Target must be set.
-
Machine must be ready to harvest:
Separator must be engaged.
Header must be engaged.
Engine must be set to high idle.
Road Mode must not be enabled.
-
Press the 3 or 2 button on the multi-function lever to resume
HarvestSmart™.

H116085-UN-25JAN17
Message
A message appears when a requirement is not met.

H118560-UN-20JAN17
Green Checkmark
Once a condition has been met, a green checkmark appears.

H118559-UN-20JAN17
Close
Select to close.
|
HarvestSmart
is a trademark of Deere & Company
|
SS43267,0000992-19-20170516
|
|