Header Activation Buttons

H116346-UN-19DEC16

Header Activation Buttons

Header positions obtained by pressing the activation buttons may be overcome by pressing reel raise/lower or reel fore/aft switch or header raise/lower and lateral tilt switch. Once the activation buttons are manually overcome, press the desired activation button to reactivate.

System Requirements:

• Properly equipped header is connected.
• Engine is running.
• Road transport disconnect switch must be in field position.
• Header Height Resume, Header Height Sensing, or Active Header Float mode are enabled.
• Header is engaged.

Pressing the header activation buttons activates the system. Header control system takes control and moves the header to your selected position.

• Header Height Resume
• Header Height Sensing
• Lateral Tilt Control
• Reel Position Resume
• Deck Plate Position Resume
• Active Header Float
• Hydraulic Feeder House Fore/Aft Tilt (If Equipped)