Flax/Linseed / Grass Seed / Guar (Cluster Beans) / Millet (Proso) / Mustard / Oats

NOTE: The following settings for various crops are for average conditions. Varying crop and field

conditions may require slightly different settings.

  Flax/Linseed Grass Seed
Feeder House Drum Position Down Down
Feeder House Conveyor Chain 26 Tooth 26 Tooth
Feed Accelerator Speed a High High
Feed Accelerator Wear Strips Serrated Serrated
Threshing Speed (rpm) 900-1100 550-850
Concave Clearance 0-10 5-25
Concave Type Small Wire Small Wire
Fan Speed (rpm) 500-700 300-600
Chaffer Settings 12-14 mm (1/2-9/16 in.) 12-18 mm (15/32-23/32 in.)
Sieve Settings 1-3 mm (1/32-1/8 in.) 3-10 mm (1/8-3/8 in.)
  Guar (Cluster Beans) Millet (Proso)
Feeder House Drum Position Down Down
Feeder House Conveyor Chain 22 Tooth b 26 Tooth
Feed Accelerator Speed Low a High a
Feed Accelerator Wear Strips Serrated Serrated
Threshing Speed (rpm) 550-700 600-700
Concave Clearance 10-15 10-15
Concave Type Round Bar Small Wire
Fan Speed (rpm) 600-750 600-750
Chaffer Settings 10-12 mm (3/8-1/2 in.) 10-12 mm (3/8-1/2 in.)
Sieve Settings 3 mm (1/8 in.) 4-6 mm (3/16-1/4 in.)
  Mustard Oats
Feeder House Drum Position Down Down
Feeder House Conveyor Chain 26 Tooth 26 Tooth c
Feed Accelerator Speed a High High
Feed Accelerator Wear Strips Serrated Serrated
Threshing Speed (rpm) 650-900 650-900
Concave Clearance 10-20 10-20
Concave Type Small Wire Small Wire
Fan Speed (rpm) 450-650 700-850
aFor improved straw quality in dry crops and grain quality, use low speed.
bAvailable through service parts.
c32 tooth is recommended for high yielding, high volume poor feeding straw crops.

 

OUO6075,00003C5 -19-25JUN09-1/2

  Flax/Linseed Grass Seed
Chaffer Settings 10-14 mm (3/8-5/16 in.) 18-22 mm (23/32-7/8 in.)
Sieve Settings 2-4 mm (3/32-3/16 in.) 6-8 mm (1/4-5/16 in.)

 

OUO6075,00003C5 -19-25JUN09-2/2