| |
Peas (Field) |
Popcorn a |
| Feeder House Drum Position |
Down |
Up |
| Feeder House Conveyor Chain |
26 Tooth |
26 Tooth |
| Feed Accelerator Speed b |
Low |
Low c |
| Feed Accelerator Wear Strips |
Serrated |
Smooth |
| Threshing Speed (rpm) |
300-350 d |
300-400 |
| Concave Clearance |
15-25 |
10-25 |
| Concave Type |
Round Bar/Large Wire |
Round Bar |
| Fan Speed (rpm) |
700-850 |
800-1100 |
| Chaffer Settings |
16-18 mm (5/8-11/16 in.) |
14-18 mm (9/16-11/16 in.) |
| Sieve Settings |
6-9 mm (1/4-11/32 in.) |
6-8 mm (1/4-5/16 in.) |
| |
Rice |
Rye |
| Feeder House Drum Position |
Down |
Down |
| Feeder House Conveyor Chain |
32 Tooth e |
26 Tooth f |
| Feed Accelerator Speed b |
High |
High |
| Feed Accelerator Wear Strips |
Serrated |
Serrated |
| Threshing Speed (rpm) |
800-1200 |
750-950 |
| Concave Clearance |
15-25 |
5-20 |
| Concave Type |
Large Wire |
Small Wire |
| Fan Speed (rpm) |
700-850 |
700-900 |
| Chaffer Settings |
16-18 mm (5/8-11/16 in.) |
16-18 mm (5/8-11/16 in.) |
| Sieve Settings |
5-10 mm (3/16-3/8 in.) |
6 mm (1/4 in.) |
| |
Safflower |
Sorghum (Milo) |
| Feeder House Drum Position |
Down |
Down |
| Feeder House Conveyor Chain |
26 Tooth |
26 Tooth |
| Feed Accelerator Speed b |
Low |
Low |
| Feed Accelerator Wear Strips |
Serrated |
Serrated |
| Threshing Speed (rpm) |
350-450 d |
550-750 |
| Concave Clearance |
15-25 |
15-25 |
| Concave Type |
Small Wire |
Round Bar/Large Wire |
| Fan Speed (rpm) |
500-750 |
750-950 |
| aChopper set to slow speed with knifebank out. |
| bFor improved straw quality in dry crops and grain quality, use low speed. |
| cFor improved grain quality, use slow down kit to 320 rpm. |
| dDo not operate below minimum speed recommendation. |
| e38 tooth is available through service parts for extremely tough material handling conditions. |
| f32 tooth is recommended for high yielding, high volume poor feeding straw crops. |