CommandTouch Multi-Speed Feeder House Drive Belt (9770 STS Option)-Replacing

CAUTION: Shut OFF engine, set parking brake and remove key.

Lower safety stop and remove left-hand feeder house shields.

Remove shields (A).

A-Shields

OUO6075,0000017 -19-27MAY08-1/2

Loosen nuts (A) to relieve tension on drive belt and loosen idler nut (B).

Remove drive belt (C) from sheaves.

Install replacement drive belt and move idler to 3/4 of way up slot and tighten idler nut.

Tighten nuts to position washer between end of gauge and bottom of step.

Install feeder house shields previously removed.

A-Nuts
B-Idler Nut
C-Drive Belt

OUO6075,0000017 -19-27MAY08-2/2