Setup Pages

H86251
H86252

NOTE: 4 pages are displayed when not equipped with Harvest Smart Feed Rate and 5 pages when equipped with Harvest Smart Feed Rate.

Page 1 of 5

Machine Settings:

  • Automatic Combine Adjust (ACA) (Numeric Entry)
    • Chaffer Position (A)
    • Sieve Position (B)
    • Fan Speed (C)
    • Threshing Speed (D)
    • Threshing Clearance (E)
    • Crop (Viewable Only) (F)
  • Crop Modifiers (G)
    • Default
    • Dry (Default)
    • Wet (Default)
    • New
    • Clean Out
  • Auto Icon (H) - Desired machine settings are chosen by operator and automatically adjust to settings shown on CommandCenter display.
  • Save Icon (I) - Allows operator to save personal machine settings.

    NOTE: Personalizing machine settings will not override factory settings.

  • Actual Box (J) - When checked, automatic adjust settings will not work. Allows operator to change settings one at a time instead of machine automatically adjusting every setting again.
  • Setpoint Box (K) - When checked, automatic adjust settings are active. Allows operator to change settings and allows machine to automatically adjust to these settings.
Page 2 of 5
  • Crop (L) 1
    • Fixed List
  • Loss Sensitivity
    • Seed Size (M)
  • Farm (N) 1
    • Alphanumeric Data Entry
    • Clear Icon (P)
  • Field (O) 1
    • Alphanumeric Data Entry
    • Clear Icon (P)

1Appears on GreenStar display (if equipped) instead of on CommandCenter.

OUO6075,0000048 -19-25JUN08-1/4

H86253
H86254
Page 3 of 5
  • Corn Head and Hour Counter 1 (A)
    • Header Type (Auto Detection)
    • Total Rows (Rows, Based on Type, Numeric Entry) (B)
    • Row Spacing (C)
    • Row Change (Decrease Cut Rows) (D)
    • Record Stop Height (Height Setup for Turning Recording ON/OFF) (E)
  • Draper/Platform/Belt Pickup and Hour Counter 1 (F)
    • Header Type (Auto Detection)
    • Minimum Reel or Belt Pickup Speed (G)
    • Total Width (Total Width, Based on Type, Numeric Entry) (H)
    • Width Change (Decrease Cut Width) (I)
    • Record Stop Height (Height Setup for Turning Recording ON/OFF) (J)
Page 4 of 5

NOTE: Page appears if equipped with moisture sensor.

  • Moisture Alarm (K)
    • ON (L)
    • OFF (M)
    • Sample Rate (0 - 4) (N)
    • Minimum Alarm (1 - 50%) (O)
    • Maximum Alarm (1 - 60%) (P)
  • Moisture Correction (-25.0 to 25.0, increments of 0.1) (Q)
    • Manual Offset Setting (R)
    • Fixed Moisture (S)
H90868

1For information on resetting header hours, see your John Deere dealer.

OUO6075,0000048 -19-25JUN08-2/4

  • Harvesting Yield Units (T)
    • Fixed List

OUO6075,0000048 -19-25JUN08-3/4

H87297
H87298
Page 5 of 5

Harvest Smart Feed Rate (Optional):

  • Current Mode of Operation
    • OFF (A)
    • Smart (B)
    • Capacity (C)
  • Max Harvest Speed (2.0 - 14.0 km/h) (1.2 - 8.6 mph), increments of (0.1 km/h) (0.1 mph) (D)
  • Target Engine Speed (2350 - 2560 rpm 1 , 2150 - 2350 rpm 2 , increments of 10 rpm) (E)
  • Response (1 - 100, increments of 1) (F)
  • Target Pressure (30 - 420, increments of 1) (G)
H86256

16.8 L engine

29.0 L and 13.5 L engine

OUO6075,0000048 -19-25JUN08-4/4