Diagnostics, Calibration, Diagnostic Readings and Special Tests Pages
H90878
H90879
Page 1 of 4

Active Alarms (A):

  • None (B) - appears when no alarms are present at this time.
  • Alarm Name(s) (C) - appears with the alarm name(s) when a problem is detected in the machine system.
Page 2 of 4

NOTE: Calibrations are done using instructions shown on CommandCenter display. Operator selects which calibration and highlights calibrate icon, and is guided through procedure.

Calibrations (D):

  • Refer to When to Calibrate in Calibration Procedures section for listing of calibrations.
H90877

OUO6075,000004A -19-19MAR08-1/2

H90873
H90874
Page 3 of 4

Diagnostic Readings (A):

  • Diagnostic Readings - assists in providing more information about a machine subsystem for troubleshooting. CommandCenter display will gather data from diagnostic addresses and displays collected information on one page.
Page 4 of 4

Special Tests (A):

NOTE: Cleaning Fan Speed Adjust special test may not perform correctly if cleaning fan speed slowdown kit was installed.

  • Diagnostic Special Tests - helps minimize amount of time required to diagnose an issue by leading operator or technician through a special set of instructions. Machine automatically the checks as the operator is guided through the special tests.

OUO6075,000004A -19-19MAR08-2/2