Draper Cutterbar Tilt Adjust Switch (Black)

NOTE: Draper cutterbar tilt adjust switch only works on a 600 series draper.

Draper cutterbar tilt adjust switch (A) allows operator the operator to increase or decrease the draper cutterbar angle.

1. Press draper cutterbar tilt adjust switch.

2. Indicator light (B) will come on indicating setting can be adjusted.

3. Turn selection dial (C) towards plus (+) symbol to tilt cutterbar down or towards minus (-) symbol to tilt cutterbar up.

4. CommandCenter display will show operator adjustment setting.

H91094


A-Draper Cutterbar Tilt Adjust Switch
B-Indicator Light
C-Selection Dial

OUO6075,0000073 -19-08APR08-1/1