Limp Mode
To get machine to move or move machine out of way, use the following
LIMP
mode.
Press main menu switch and rotate selection dial until message center icon is highlighted and press confirm switch.
Rotate selection dial until diagnostic address icon is highlighted and press confirm switch.
Rotate selection dial until device (controller) drop menu is highlighted and press confirm switch.
Rotate selection dial until
VCM
controller is highlighted and press confirm switch.
Rotate selection dial until address
103
is highlighted and press confirm switch.
First digit will begin to flash.
Rotate selection dial until first digit is changed to a one and press confirm switch.
Rotate selection dial until save icon is highlighted and press confirm switch.
NOTE:
ALLOWS MACHINE TO OPERATE UP TO FOUR HOURS. NOT TO BE USED FOR NORMAL OPERATION. Call your John Deere dealer to have machine inspected immediately.
|
Emergency Mode
To get machine to move or move machine out of way, use the following
EMERGENCY
mode.
Press main menu switch and rotate selection dial until message center icon is highlighted and press confirm switch.
Rotate selection dial until diagnostic address icon is highlighted and press confirm switch.
Rotate selection dial until device (controller) drop menu is highlighted and press confirm switch.
Rotate selection dial until
VCM
controller is highlighted and press confirm switch.
Rotate selection dial until address
102
is highlighted and press confirm switch.
Rotate selection dial until save icon is highlighted and press confirm switch.
Once confirm switch is pressed, machine can be temporally moved.
NOTE:
MOVES MACHINE FOR 30 SECONDS. NOT TO BE USED FOR NORMAL OPERATION. Call your John Deere dealer to have machine inspected immediately.
|